ECS NF650iSLIT-A Motherboard Review :: ECS NF650iT-A BIOS

ECS uses Phoenix AwardBIOS on their motherboards with almost no modifications for their purposes. The main menu is split into Standard CMOS, Advanced BIOS Features, Advanced Chipset Features, Integrated Peripherals, Power Management Setup, PnP/PCI Configuration and PC Health Status. The menu is the same as on any of the other boards using this BIOS, with the Advanced Chipset Features holding most of the Memory settings for the board.

Battery

nTune

nTune Overclocked

The FSB of the CPU can be set from 400-2400MHz in 4MHz increments. The fine-tuning of the FSB is done in 4MHz increments due to the QDR (Quad Data Rate) of the Intel CPUs meaning for each MHz of actual speed, 4MHz is reported. Memory can be set from 400MHz-1400MHz in 1MHz increments. The lowest speed DDR2 memory on the market is 400MHz, while there are 600MHz modules on the market, meaning that there is still room to grow on this front.

CPU Core Voltage can be set from 0.850V to 1.60V in 0.025V increments. Memory Voltage can be set from 1.8v to 2.2v in 0.05 increments. nForce SPP Voltage can be set from 1.2V to 1.5V in 0.05V increments. The FSB Voltage can be set from 1.2V to 1.4V in 0.05V increments.

BIOS Screenshots

Discuss This Article