|
|
|||||||||||||||||
|
 System build  Front panel off DVD insertion  DVD insertion  DVD installed The system build is important to show how easy or hard it is to put together a system built with the case in question. The first step is to install the motherboard. This is easily done on the Helios 910 by using the included standoffs and screws. Optical drive installation is done by first removing the front panel of the case.  Motherboard mounted  Components installed  HDD rack  Rear of mounted HDD Opening the front panel is as easy as placing one hand on the bottom of the case in a socket behind the front panel, another on the top of the front panel and pulling outward to remove the front panel. Open the drive bay by pressing both clips together on the sides of the bay and pull the cover outwards. The next step is removing the side panels; slide the ODD into the selected spot all the way into the case and screw the drive in.  Rear ¾ side view  Right side sans door  Completed system  Rear of case Installing the HDD(s) is easy as well. Simply unscrew the thumb screws from both sides of the HDD cage, pushing it outward or pulling it forward, slide the HDD into the cage and use the screws to secure the HDD into the cage. Slide the HDD cage back into its original position and fasten the thumb screws on both sides of the HDD cage. The PSU can be installed with either the fan in the upright or face down position. 
|
|
|||||||||||||||
