tray removal back
Side view tray removal
Opening the case is an easy procedure of unscrewing the three thumb screws to open the top panel and pulling back the top panel to loosen the panel. The LANBOX Lite has a removable motherboard tray that is removed by unscrewing the 7 screws and tugging on the ring on the bottom of the motherboard tray to remove the tray.
Motherboard tray removed
Top down view
To remove the Optical drives simply remove the two screws holding the ODD rack and pull and slide out the rack. The HDD rack is removed by unscrewing one screw and sliding the HDD rack out to remove the HDD rack. Removing the Front panel is a matter of pushing and releasing the five springs holding the front panel and pulling it off the front. As you can see it is quite easy to take the case apart for the next step which is installation