|
|
|||||||||||||||||
|
 System build components  Pure Silence ISGC Fan 12  Fan installed  Motherboard installed The system build is of utmost importance on a case review. The first step is to remove the thumb screws holding the side panels of the case and slide the case sides off the case. From here you can install the motherboard by screwing in the standoffs and mounting the motherboard into place. Note that the case can take ATX and micro ATX motherboards and you need to put the correct stand offs in place.  DVD-RW installation  Side view of DVD  DVD installed  Cable management To install a 5.25" drive, simply pull the bottom of the front panel to remove it from the case. Remove the 5.25" drive bay plastic cover and the metal cover, push inward and upward to unlock the tool-free clip, insert the 5.25" drive into the drive bay and push inward and downward on the clip to lock the drive into place. The other drive bays installation is done with a tool-free thumbscrew, simply slide the drive into place and use the thumb screw to install it.  HDD side view  HDD rear view  Rear complete system  Left side completed system Installation of the 3.5" drives is similar. The top bay has a tool-free clip that you need to push inward and upward to unlock the clip. Insert the HDD into the HDD cage then push inward and downward on the clip to lock it back into place. This procedure is second nature once you take a look at the mechanism on the case. The other six 3.5" drive bays use thumbscrews to lock the drives into place, as well as the 2.5" drive bay for the SSDs.  
|
|
|||||||||||||||
