Tagan A+ Seenium BM Case Review :: Interior

02-05-2009 · Category: Hardware - Cases

By Ben Sun

Tagan A+ Seenium BM Case Review Side open

Side open

Tagan A+ Seenium BM Case Review 5.25

5.25" clips and holes

Tagan A+ Seenium BM Case Review HDD rack

HDD rack

Tagan A+ Seenium BM Case Review Rear of HDD rack

Rear of HDD rack


The interior of the case is very interesting in that the side of the 5.25" drive bays has a row of screws drilled into the side next to the clips that hold the 5.25" drives into place. While the drives are held into place by the clips, there are screws to hold the drives into place if you want them for added security during transport. There are five 5.25" drive bays one of which has a 3.5" adapter for the FDD.


Tagan A+ Seenium BM Case Review PCI slots

PCI slots

Tagan A+ Seenium BM Case Review PSU area

PSU area

Tagan A+ Seenium BM Case Review Fan grill

Fan grill

Tagan A+ Seenium BM Case Review Fan grill 2

Fan grill 2


There are five bays in the HDD rack to install 3.5" hard disks into. Each bay slides out separately and has two screws on each side of the bay to hold the hard disk into place. The screws are built into the bays so it is still considered a screwless solution as there are no loose screws to mess with or need for a screwdriver to put them into place.


Tagan A+ Seenium BM Case Review Cable ties

Cable ties

Tagan A+ Seenium BM Case Review Rear fan

Rear fan

Tagan A+ Seenium BM Case Review Side

Side

Tagan A+ Seenium BM Case Review Top down view

Top down view


The rear of the case has spaces for seven PCI devices. Each of the PCI devices is held into place by a plastic clip. If you want to secure it more you can screw the devices into place. The bottom of the case is where the PSU is located, like on many higher end cases. Below the PSU area are two grills for bottom mounted fans.

Cable management in the case is handled by cable ties that can be moved. This is allows the modder to move cables to their liking and keeps everything neat and tidy. Above the PCI slot clips is a 120mm fan to keep the motherboard and CPU area cool. Next to the 120mm fan is another grill area for a side mounted fan. Overall this case has a lot of fan grills to keep airflow to a maximum.