The Mother Board
Need Compaq 7594 layout diagram

 
Post new topic   Reply to topic    The Mother Board Forum Index -> Motherboard Identification Forum
View previous topic :: View next topic  
Author Message
CCRAMan
Pilgrim
Pilgrim


Joined: 26 Feb 2003
Posts: 2

PostPosted: Wed Feb 26, 2003 2:47 am    Post subject: Need Compaq 7594 layout diagram Reply with quote

I've tried searching on Google and the Compaq/HP website, and I can't seem to find any diagrams. I took this board out of the case and installed a bigger and better one. I recently got my hands on an old, small, desktop case from Gateway and decided to replace the board in it. At least this case has the wires labeled. But of course there are no labels on the motherboard eye roll

Anyway the spare no. is 170686-101
The part no. is 157126-101

If needed I can post additional information. It is running a 566 Celeron. What watt power supply should I put on it as well?
The devices I hope to put on it are:

96 megs ram (hope to add more later)
12x dvd
12x10x32 CD-RW (at least, might be faster, not sure yet)
32 meg Geforce2 MX200 Asylum PCI video card
floppy
Two nics (sounds weird I know, but I'm going to try bridging a couple of different networking types, phoneline and regular cat5e)
1.6 Gig hard drive (hope to add bigger later and possibly an additional one)

Or if someone could direct me to a decent power consumption table, I'd appreciate it.

Thanks.

JR
Back to top
View user's profile Send private message
Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master


Joined: 16 Dec 2001
Posts: 14081
Location: Maine

PostPosted: Wed Feb 26, 2003 5:21 am    Post subject: Reply with quote

BMW-R motherboard (OEM version of the Mitac 6513WU motherboard).

info:
http://www.compaq.com/athome/support/msgs/7500/

http://www.igs.net/~ndaines/Qfiles/bmw-r.html

Toby
_________________
Compaq-Fu Master
Other sites:
Hydrocephalus-Talk
DSL/Cable Webserver
Back to top
View user's profile Send private message Send e-mail Visit poster's website
CCRAMan
Pilgrim
Pilgrim


Joined: 26 Feb 2003
Posts: 2

PostPosted: Sun Mar 02, 2003 11:56 pm    Post subject: Reply with quote

Thanks. That second link was just what I needed. After playing with it a little, I was able to get it working fine.

JR
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    The Mother Board Forum Index -> Motherboard Identification Forum All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group