| View previous topic :: View next topic |
| Author |
Message |
dylk Pilgrim

Joined: 07 Mar 2013 Posts: 2
|
Posted: Thu Mar 07, 2013 3:27 pm Post subject: BIOS acting strange |
|
|
Mobo: asus p7p55d-e
Hello all,
Recently my psu died, and after replacing it my computer functioned OK. However if I attempt to enter BIOS, the screen is littered with random characters amongst some of the usual screen.
I figured it meant it was corrupted in some way but for some reason my computer still posts/runs fine. I have cleared CMOS, hard reset, flashed a newer BIOS using asus update. when I try to enter bios It sits at a screen flashing with characters in a somewhat loop, and if I press a key it boots me out, says 'CHECKING NVRAM' then boots into windows.
Please see the images as I cannot really explain the situation.
http:// sdrv.ms/YPIAlo
http:// sdrv.ms/13IsbH0
What stumps me as 1). why does the computer still boot 2). why does reflashing not affect it
So im asking your wonderful community for advise on how to / if I can correct this situation, as all values are at default and RAM etc is running at 600MHZ when it should be at 1600MHZ, which I would like to correct. Also is it time for a new mobo
cheers guys
p.s. the motherboard generally slightly overclocked the RAM and CPU automatically. |
|
| Back to top |
|
 |
bdub Black Belt 3rd Degree


Joined: 19 Feb 2003 Posts: 3348 Location: Washington D.C.
|
Posted: Thu Mar 07, 2013 5:32 pm Post subject: |
|
|
have you tried reseating videocard and ram? also if you have another videocard to try, that would be a good test... and maybe dropping to less sticks or different sticks of ram, for a test, to see if you can get into the bios.
are you seeing no artifacts in the display at all when running the OS?
it would be interesting to see what it would do with a pre-OS based program routine like memtest.
http://www.memtest.org/
where are you seeing this ram speed being shown as 600mhz? that could be the result of speedstep varying the clock as a power saver feature. _________________ my main rig...
asrock 970 extreme3
AMD athlonII X3 440
zalman cpns5x performa hs/fan
crucial ballistix 2x4gb sport ddr3-1333
powercolor 3850 256bit/512meg vga
antec neo he 650r
kingston hyperx 3k ssd 120GB
seagate 500GB HDD 32M cache
seagate 750GB HDD 32M cache
hitachi 1TB HDD 32M cache
lg wh14ns40 bd burner
optiarc ad-7240s sata dvdrw (nec chipset) |
|
| Back to top |
|
 |
dylk Pilgrim

Joined: 07 Mar 2013 Posts: 2
|
Posted: Thu Mar 07, 2013 9:26 pm Post subject: |
|
|
thanks bdub for your reply,
I happened to stumble upon the issue, which was one of my secondary HDD was for some reason causing this, and once disconnected BIOS runs fine. Assuming it had something to do with old boot partition into windows 8 release preview. quick format should do it hopefully.
once again, cheers for the reply!  |
|
| Back to top |
|
 |
evasive Mobo-fu Master


Joined: 06 May 2001 Posts: 36479 Location: Netherlands, Breda
|
Posted: Fri Mar 08, 2013 12:12 am Post subject: |
|
|
If disconnecting a power drain improves overall system stability, it is power supply replacement time. _________________ We hate rut, but we fear change.
System error, strike any user to continue... |
|
| Back to top |
|
 |
Karlsweldt Enlightened Master


Joined: 12 Nov 2003 Posts: 18694 Location: 07438
|
Posted: Fri Mar 08, 2013 6:39 am Post subject: |
|
|
The capacitors on the motherboard (and video card!) should be examined for domed tops, excess leaning or signs of leakage. If noted, they are bad. The same malady affects the PSU also. More info at www.badcaps.net/ .
For replacement of capacitors on a motherboard or other device card, use the same values as the original. The temperature rating should be 105° C. and have a "low ESR" rating. If caught early, there may be no permanent damage. But with a PSU, regulation may not be the same.
For capacitor replacement, use a soldering iron or gun rated at 100 watts or better. The idea is to "get in and get out" with the heat, so as to not damage nearby components.
For a list of bad capacitor types, check this reference here on the Forum.. http://www.motherboards.org/forums/viewtopic.php?t=101830 _________________ F@H.. to solve mankind's maladies.. in our lifetimes! |
|
| Back to top |
|
 |
Hardware Junkie Mobo-fu Master


Joined: 25 Jan 2001 Posts: 19367 Location: 00000h - 0000Fh
|
Posted: Fri Mar 08, 2013 12:48 pm Post subject: |
|
|
Your new power supply could be the problem if its weak.
But generally here are your likely suspects:
-Video Card or onboard video chip, or some electronic component associated with it.
-Memory
-Motherboard
It sounds like you are having difficulty flashing the BIOS, so that would be my first suspect.
I wouldn't overclock the system while you are checking it either, get the thing back to defaults and see if it fixes the problem.
There is a post here with similar issues, and screenshots. New video card fixed the problem:
http://hardforum.com/showthread.php?t=1460252 _________________ "Imagination is the only weapon in the war against reality." -Jules de Gautier
 |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|