The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Tue Aug 14, 2018 9:35 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: asking for a friend
PostPosted: Sun Apr 03, 2016 5:37 am 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14299
Location: Maine
A friend contacted me this morning, apparently their mother replaced the power button on a PC, no it's stuck on the automatic repair splash screen for the past 24 hours..


Attachments:
IMG950374.jpg
IMG950374.jpg [ 28.17 KiB | Viewed 891 times ]

_________________
Compaq-Fu Master
Ctechinfo funding drive information
Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Sun Apr 03, 2016 9:09 am 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Wed Nov 12, 2003 11:57 am
Posts: 20848
Location: 07438
What type of PC, and what OS?
The power button should be momentary-contact, not push on/push off like a light switch.
The switch contact header on the proper front panel pins?
If the switch is the proper type, was power totally removed from the system while repairing?
Could be the BIOS battery is dying, and may need replacement and reset to default.
Hopefully, that 'automatic repair' process is not doing a factory default OS setup!
Could also have been a service update for the OS, and has access problems to the data.
http://answers.microsoft.com/en-us/wind ... 49d?auth=1

_________________
F@H.. to solve mankind's maladies.. in our lifetimes!


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Sun Apr 03, 2016 2:19 pm 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14299
Location: Maine
Newer Dell (about 5 years old)
Windows10 Home (guessing)

All I got for info was the message they replaced the power button and the above pic. The only scenario I can think happened was a short or some other electrical malfunction caused the OS to get hosed...

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Mon Apr 04, 2016 8:11 am 
Offline
Black Belt 2nd Degree
Black Belt 2nd Degree

Joined: Mon Aug 09, 2004 7:33 pm
Posts: 2740
Location: Milwaukee - Wisconsin
couple options...

have they tried just hitting F8 and told it explicitly to start normally?

disconnect everything(including power from wall) and hold the power button in for at least 30 seconds or more. plug all back in and start again.

http://appuals.com/preparing-automatic- ... indows-10/

-Roach

_________________
Lian Li Lancool First Knight Series PC-K59W
Intel Core i7-960 Bloomfield 3.2GHz
EVGA X58 FTW3 132-GT-E768-TR
EVGA GeForce GTX 1070 FTW GAMING ACX 3.0
G.SKILL Ripjaws Series 12GB (3 x 4GB)
Crucial M4 128gb SATAIII SSD x2
Crucial M4 256gb SATAIII SSD
OCZ Saber 1000 960GB Enterprise SSD
Corsair Professional Series HX850 PSU
Dell UltraSharp U2713HM 27" w/drop ceiling mount
Logitech G930 7.1 Headset
DBPOWER RGB LED Keyboard
Logitech G402 Hyperion Fury


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Thu Apr 07, 2016 1:21 pm 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14299
Location: Maine
ok so she took the advice given...

F8 had no effect so I am told...

She pressed F12 and memory test failed with error code 2000-0123.. Hard drive said to have passed..

I relayed the message that I need the tower in my hands if there is any chance of fixing it... hard to repair a pc via text, when the person on the other end is a newb..

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Thu Apr 07, 2016 4:56 pm 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Wed Nov 12, 2003 11:57 am
Posts: 20848
Location: 07438
The system should allow BIOS pages entry, if not then a problem on the motherboard or possibly the wrong header has the primary drive. That "preparing automatic repair" message indicates that a boot process has stalled at the hard drive initial read.
If BIOS entry is good, then set the boot order for an optical drive path as first option. Then try an optical disk which has the auto-run feature, or the OS install disk. If a boot to that, the motherboard should be good. If successful in reading the optical disk, should be a message "press any key to boot from CD-ROM" which you should respond to within 5 seconds.
Just hope it is not some form of "ransom ware" that has captured the system!

_________________
F@H.. to solve mankind's maladies.. in our lifetimes!


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Thu Apr 07, 2016 10:17 pm 
Offline
Enlightened Master
Enlightened Master

Joined: Fri Jun 14, 2002 1:03 am
Posts: 17134
Location: England
Looks like something got 'knocked' on the repair (memory). Tell them to reseat all RAM modules and Video/PCI-e/PCI cards...

_________________
I have been programming on computers since the ZX81.
I am an apprentice trained Electronics Engineer with qualifications to back it up.
I have been repairing computers since 1996.
Yet to some people I still know nothing...


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Fri Apr 08, 2016 2:14 pm 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14299
Location: Maine
Mr T wrote:
Looks like something got 'knocked' on the repair (memory). Tell them to reseat all RAM modules and Video/PCI-e/PCI cards...


its getting dropped off this weekend.. we shall see

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
 Post subject: Re: asking for a friend
PostPosted: Sun Apr 17, 2016 9:17 pm 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14299
Location: Maine
well it gets into the autorepair process and endless loop of puking out error messages...

everything from bad memory headers, to spool issues, etc.. I told the owners daughter the best I can manage is pulling important stuff off the drive. I don't have the cash to dump into and hope I get paid.

and still no clear direction on what they want to do.. :roll:

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group