Can't find memory latency settings?

Moderator: The Mod Squad

Postby Frozti » Tue Feb 12, 2013 8:09 pm

rascard2007 wrote:the error can be due to a bad memory stick, check it
other errors to. That was just the most popular. And stuff crashes a lot. The memory was pretty much brand new, if I got bad memory ima be pissed. How do you know?
Frozti
Initiate
Initiate
 
Posts: 34
Joined: Sat Nov 17, 2012 4:44 pm

Postby evasive » Tue Feb 12, 2013 10:30 pm

We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Hardware Junkie » Wed Feb 13, 2013 6:50 am

You also might want to test the sticks one by one, or in pairs if required by your board. If a stick fails, try in different slots. You could have a bad ram slot on the board or might not be seated correctly.
"Imagination is the only weapon in the war against reality." -Jules de Gautier

Image
Hardware Junkie
Mobo-fu Master
Mobo-fu Master
 
Posts: 19405
Joined: Thu Jan 25, 2001 1:01 am
Location: 00000h - 0000Fh

Postby Karlsweldt » Wed Feb 13, 2013 11:21 am

"Page fault in non-paged area" could be the result of a module going bad, or more likely the supply voltage is too low. Ensure the modules used are in compliance with what is recommended. Your mobo uses a memory controller that is embedded in the CPU die.. and requires a lower voltage source (under 2 volts). If the level is not proper for the memory modules, paging will fault. The BIOS should have a provision to increase the memory control voltage a bit. But be careful, as too high can cause damage to the CPU as well as memory!
F@H.. to solve mankind's maladies.. in our lifetimes!
Karlsweldt
Mobo-fu Master
Mobo-fu Master
 
Posts: 20690
Joined: Wed Nov 12, 2003 11:57 am
Location: 07438

Postby bdub » Wed Feb 13, 2013 1:29 pm

have you checked the board for bad capacitors... bulging, or oozing?
my main rig...
asrock 970 extreme3
AMD athlonII X3 440
zalman cpns5x performa hs/fan
crucial ballistix 2x4gb sport ddr3-1333
powercolor ax7750 1GBK3-H vga
antec neo he 650r
Samsung 840 EVo SSD 120 GB
toshiba 2TB HDD 64M cache sata3
seagate 1TB HDD 64M cache sata3
hitachi 2TB HDD 64M cache sata3
lg wh14ns40 bd burner
optiarc ad-7240s sata dvdrw (nec chipset)
bdub
Black Belt 3rd Degree
Black Belt 3rd Degree
 
Posts: 3657
Joined: Wed Feb 19, 2003 2:12 am
Location: Washington D.C.

Previous

Return to BIOS

Who is online

Users browsing this forum: YandexBot [Bot] and 0 guests