Moderator: The Mod Squad
Recovering from a POST/BIOS update failure
If power to your computer is interrupted while POST/BIOS is being updated (flash update), your computer might not restart correctly.
If this happens, perform the following procedure commonly called Boot-block Recovery.
Note: If your computer has no internal diskette drive, an optional USB diskette drive must be connected to use the BIOS flash diskette.
1. Turn the computer off and insert the BIOS flash diskette in the diskette drive.
2. Turn the computer on and immediately press the Ctrl and Home keys (Ctrl + Home) during the startup.
3. The computer will automatically begin recovering the BIOS. During this time you will see a screen indicating that flash recovery has started.
After the update session completes, the computer automatically restarts.
4. Remove the BIOS flash diskette from the diskette drive.
Users browsing this forum: No registered users and 0 guests