Thank you for the kind words! I am resuscitating this log with a new update. The project was put on the back burner while Nate and I were occupied with other obligations. I've ditched painting the 15" LCD until I can afford something bigger. I'm also swapping out the Razer Lycosa KB to the Logitech G15 KB. I dismantled it yesterday so it can be painted with WWII German Camo, similar to the Panzerbox bezel.
You must remove all of the Black screws on the back of the G15 KB.
Gently push open the the Black tab, to pull out the ribbon wire connection.
Once inside the KB, 19 Silver screws that must be removed.
After the 19 screws are removed, you must gently pry open the Grey plastic tabs that hold on the Grey trim piece.
The KB trim piece will be painted WWII German Camo
The Logitech badge pops off with ease. It would be cool to mill a new badge from aluminum, maybe the German cross?
The G15 lens should remove easier by applying pressure from the inside out with a finger.
I used a model knife to peel off the right side indicator lens
4x Silver screens fasten on the LCD bezel to the KB.
G15 LCD bezel buttons removed. The frame of the window will be painted.