The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Sat Aug 18, 2018 12:58 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Sep 27, 2007 4:20 pm 
Offline
Initiate
Initiate

Joined: Sun Jul 13, 2003 2:25 am
Posts: 51
I want to do a new build using an old Dell case that originally ran a P II. I think it will work but the power button (and hd light and reset button I think) are all controlled by one small board that is connected to the mother board by a small ribbon cable vs. each having their own wires. Is there an adapter available to convert these or do I have to spring for a new case ? If there is an adapter what is it called and where might I get one ? The only local store I can think of is Radio Shack. Thanks.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 27, 2007 7:21 pm 
Offline
Black Belt
Black Belt

Joined: Fri Jun 03, 2005 9:33 pm
Posts: 887
Location: NH
ATX Power Switch with Cable and Connector

http://www.directron.com/atxswitch.html

http://www.google.com is yer friend.

_________________
I tried using a "Point of View Gun", but my aim was lousy. ;-)

ASUS K8N, AMD Sempron 3100+(1.8ghz), 1gb RAM, eVGA 5500FX 256mb AGP, two WD120gb SATA drives in RAID 0 (striping), 450w power supply.

Fold well, so that others may prosper.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 27, 2007 7:27 pm 
Offline
Black Belt
Black Belt

Joined: Fri Jun 03, 2005 9:33 pm
Posts: 887
Location: NH
http://en.wikipedia.org/wiki/ATX

Quote:
Dell power supplies
Older Dell computers, particularly those from the Pentium II and III times, are notable for using proprietary power wiring on their power supplies and motherboards. While the motherboard connectors appear to be standard ATX, and will actually fit a standard power supply, they are not compatible. Not only have wires been switched from one location to another, but the number of wires for a given voltage has been changed. Thus, the pins cannot simply be rearranged.[3]

The change affects not only 20-pin ATX connectors, but also auxiliary 6-pin connectors. Modern Dell systems may use standard ATX connectors.[4] Dell PC owners should be careful when attempting to mix non-Dell motherboards and power supplies, as it can cause damage to the power supply or other components. If the power supply color coding on the wiring does not match ATX standards, then it is probably proprietary. Wiring diagrams for Dell systems are usually available on Dell's support page.

_________________
I tried using a "Point of View Gun", but my aim was lousy. ;-)

ASUS K8N, AMD Sempron 3100+(1.8ghz), 1gb RAM, eVGA 5500FX 256mb AGP, two WD120gb SATA drives in RAID 0 (striping), 450w power supply.

Fold well, so that others may prosper.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 27, 2007 7:35 pm 
Offline
Black Belt
Black Belt

Joined: Fri Jun 03, 2005 9:33 pm
Posts: 887
Location: NH
Quote:
case mod 101: the ATX power switch demystified


http://case-mods.linear1.org/case-mod-101-the-atx-power-switch-demystified/

_________________
I tried using a "Point of View Gun", but my aim was lousy. ;-)

ASUS K8N, AMD Sempron 3100+(1.8ghz), 1gb RAM, eVGA 5500FX 256mb AGP, two WD120gb SATA drives in RAID 0 (striping), 450w power supply.

Fold well, so that others may prosper.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Sep 28, 2007 6:47 am 
Offline
Initiate
Initiate

Joined: Sun Jul 13, 2003 2:25 am
Posts: 51
Thanks for the posts. Unfortunately I cut class in electrical engineering college when they talked about ATX power supplies and the link is a bit above my head. My build parts, MB, CPU, etc... are showing up today and don't know if I want to wait for more parts to mod the case. I think I'll (gasp) just go out and buy one (double gasp) retail.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Sep 28, 2007 12:14 pm 
Offline
Black Belt
Black Belt

Joined: Fri Jun 03, 2005 9:33 pm
Posts: 887
Location: NH
app1mpo wrote:
Thanks for the posts. ... I think I'll (gasp) just go out and buy one (double gasp) retail.


Sounds like a good (and safe) idea to me. Enjoy. 8)

_________________
I tried using a "Point of View Gun", but my aim was lousy. ;-)

ASUS K8N, AMD Sempron 3100+(1.8ghz), 1gb RAM, eVGA 5500FX 256mb AGP, two WD120gb SATA drives in RAID 0 (striping), 450w power supply.

Fold well, so that others may prosper.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group