The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Wed Sep 19, 2018 5:22 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 228 posts ]  Go to page Previous  1 ... 18, 19, 20, 21, 22, 23  Next
Author Message
 Post subject:
PostPosted: Wed Mar 21, 2007 3:39 am 
Excellent post. I have just about replaced the whole PC before booting the MB up on the box it came in. All worked fine. When I removed the new motherboard that was not functioning I found the extra case mount standoff. I did not have any problem until I installed another card and pushed down on the PCI slot which caused the short. I was just at the verge of ringing up an expert for help. Would have looked like a real pro if they had found the problem. Especially with all the gear from the lets get a new one and see if it is that process of elimination that I have just gone through.


Top
  
Reply with quote  
 Post subject:
PostPosted: Wed Mar 21, 2007 9:42 am 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Sun May 06, 2001 12:01 am
Posts: 37463
Location: Netherlands
Ah yes and let's not forget the occasional screw that gets trapped between your motherboard and the casing when replacing a harddisk. Always triple-check if you are suddenly short of screws...

_________________
We hate rut, but we fear change.
********************************
System error, strike any user to continue...


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Mar 24, 2007 2:27 pm 
Offline
Initiate
Initiate

Joined: Tue Apr 04, 2006 4:48 pm
Posts: 78
It's not exactly an installation fault, but it was dumb, and others should avoid it.

It was late, a recipe for disaster in and of itself. I had just downloaded FreshDownload (that or another download manager) so I could do one last thing before collapsing for the night. It installed, and then requested a restart. This, naturally, pissed me off. There's nothing in my machine that needs to be mucked with by software as simple as a download manager that would require a post-install restart. I hit the okay button, and then realize I'm too tired to wait for the reboot and then still finish my to-do list. But I don't want to wait for the reboot to turn off my laptop either, and I get a little madder. I press the power button, while the machine is prepping for a restart, and hold it till the machine powers off sans the shutdown.

Apparently, that's a bad time for a manual shutdown. Afterwards, no boot, bluescreen flash right before restart-cycle, and my windows CD can't even recognize the partition for a repair install. Fortunately, KNOPPIX can read the partition, and I rescued my data, but it can't write to it, and there appears to be no hope of repairing the ever finicky NTFS filesystem. I'll have to reformat and just be happy that I got my stuff back. Since I didn't have time to recover the stuff until now, I've been without my laptop for more than month.

The moral? It's not about safe booting, it's about anger. Your computer can sense anger, and even if it isn't directly focused at the machine itself, it can take it personally. If you feel your temp rising, go the extra mile and show your friend how much you care: break out that can of imported compressed air or turn up your PCs favorite Sinatra mp3. When you're good to puter, puter's good to you. When you're not, it can quickly reduce you to tears and the fetal position.

_________________
Free Video Games
AMD Athlon 64 3500+ ASRock Dual-Sata2
ati 9600 Pro 256 meg 2gig ddr400 ram


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Jun 25, 2007 12:38 am 
Offline
Pilgrim
Pilgrim

Joined: Sun Jun 24, 2007 7:36 pm
Posts: 3
haha how about leaving one too many spacers (it was the only non-metallized hole), and in (apparently) the worst spot possible.

it created a short circuit and started smoking the instant it powered up!

the chip burnt a hole right through the PCB on a non-important area.

luckily i find out the mobo is defect anyway :D.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 20, 2007 4:10 pm 
Offline
Black Belt 5th Degree
Black Belt 5th Degree

Joined: Tue Jul 10, 2001 12:01 am
Posts: 5491
Location: Flintshire, U.K
If you are using one of those cases that comes with multiple fans, lights, etc, make sure that you don't double connect one of them to the PSU. It sounds improbable but its actually possible to link 2 or more fans to each other and then connect them both to different connectors from the PSU 8)

When you install a motherboard just check that none of the springy pieces of metal on the backplate get trapped in the keyboard, mouse or Network connector. I spent 30 minutes the other night figuring why my mouse wouldn't go into the PS/2 port :oops:

Pete

_________________
Image


Last edited by Pette Broad on Thu Sep 20, 2007 4:21 pm, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 20, 2007 4:13 pm 
Offline
Black Belt 5th Degree
Black Belt 5th Degree

Joined: Tue Jul 10, 2001 12:01 am
Posts: 5491
Location: Flintshire, U.K
evasive wrote:
Always triple-check if you are suddenly short of screws...


:D :D Jeez, I always have loads of them left over :wink:

Pete

_________________
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Sep 20, 2007 7:49 pm 
Offline
Black Belt 5th Degree
Black Belt 5th Degree

Joined: Sat Feb 14, 2004 12:55 am
Posts: 7251
Location: Fulton, New York, on Earth
Pette Broad wrote:
When you install a motherboard just check that none of the springy pieces of metal on the backplate get trapped in the keyboard, mouse or Network connector. I spent 30 minutes the other night figuring why my mouse wouldn't go into the PS/2 port :oops:

Pete


Pete: Glad I'm not the only one that does that LOL. Mine always seem to get stuck in the networking ports LOL...

S-


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Sep 21, 2007 4:31 am 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Sun May 06, 2001 12:01 am
Posts: 37463
Location: Netherlands
The plastic part of any PS/2 connector can get trapped in there too and if you are using a replacement it doesn't fit either...

_________________
We hate rut, but we fear change.
********************************
System error, strike any user to continue...


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Sep 22, 2007 3:02 pm 
Offline
Black Belt 5th Degree
Black Belt 5th Degree

Joined: Tue Jul 10, 2001 12:01 am
Posts: 5491
Location: Flintshire, U.K
evasive wrote:
The plastic part of any PS/2 connector can get trapped in there too and if you are using a replacement it doesn't fit either...



Yes, sometimes that little plastic lug on the PS/2 connector comes off inside the port and its completely impossible to get it out. You have to snap off that lug in every other mouse you wish to use with that board. Guess I've seen that three times now.

Pete

_________________
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Oct 21, 2007 3:54 pm 
Offline
Initiate
Initiate

Joined: Sat Oct 20, 2007 12:03 pm
Posts: 43
Location: New Zealand
I did this after my psu blew itself up. I went to replace the PSU with a newer one when i realized that the case i was using was far to small for it to fit.

So i spent most of the day (this is when i didnt no much about building computers) putting everything into another spare case i had lying around. Booted the computer up was working fine. For some reason (stupid stupid reason) i left the side of my case off just so i could pretty much look at my proud work. The front of this newer case had usb ports connected so it had a few wires going through to the motherboard.

Eventually (this was bound to happen) my toes started playing with this wire for the usb ports.. and then when i finally realized what the hell i was doing i quick smart got my toes out of the inside of my case only to rub the wire along the bottom of my exposed circut board of the HDD. Before i realized what i had done the computer switched itself off. I thought thats weird so i turned it back on and very quickly the room filled itself with a very nasty smell of "your an idiot and fried something".

Believe me... LESSON LEARNT :(


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 228 posts ]  Go to page Previous  1 ... 18, 19, 20, 21, 22, 23  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group