The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Tue Sep 25, 2018 7:48 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 225 posts ]  Go to page Previous  1 ... 17, 18, 19, 20, 21, 22, 23  Next
Author Message
 Post subject:
PostPosted: Mon Jan 31, 2005 9:00 am 
Offline
Black Belt 1st Degree
Black Belt 1st Degree

Joined: Mon May 17, 2004 10:37 am
Posts: 1519
Location: lost in Georgia
Going through the bios and not using clockgen or other tweaking/oc'ing programs, the hightest stable oc I have been able to achieve is 2.35ghz. This Asus board doesn't allow you to adjust the multiplier or lock the agp/pci so that is a bummer as I believe from all the reading I've done and seeing the results of others that I could reach a higher oc if I had those two options available to me.

Here are the settings:

HTT(Still called FSB in this BIOS) 235mhz

Multiplier X 10

vCore 1.55V

Divider(Memclock to CPU Ratio) 1:1

Temps on the cpu when it is under 100% load remain between 47C to 50C, and at idle, temps will drop to 37C to 40C. I am using a stock hs/f cpu cooler, and Kingston Value Ram @ 3-3-3-8 CAS latency timings with the DDR voltage at 2.6V.

I may be able to reach a higher oc as soon as I get lower CAS latency memory and a better cpu cooler. We shall see. :twisted:

_________________
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Feb 01, 2005 5:34 am 
Offline
Green Belt
Green Belt

Joined: Thu Apr 29, 2004 4:20 pm
Posts: 152
Well my best so far with my current setup is 9x300Mhz HTT(3x HTT) , 5:4 250Mhz Ram for a nice 2.7GHz, good enough for 31s SuperPi Score to 1M places, but for everyday use I am at 10x250MHz HTT(4X HTT), 1:1
Vcore set to 1.55v
Ram Set to 2.75
Timings are 2.5-3-3-7 1T

Other Notables

P3 600E@800Mhz ( Still running 4 years later )
P3 700E@1050Mhz
AMD 1600+@1.9Ghz
P4 1.6A@2.4GHz
P4 2.4B@3.0Ghz
AMD 2500+@2.3GHz


Top
 Profile  
Reply with quote  
 Post subject: Over...
PostPosted: Fri May 13, 2005 6:54 am 
Offline
Pilgrim
Pilgrim

Joined: Fri May 13, 2005 6:41 am
Posts: 2
I am not really an overcloker, but the theme is very hot...
I have just built a computer with an Asrock 4145 GV 5.0 mobo
and a northwood 2.26.
Just for play I moved the fsb to 166, and voilá, the speed of
that little thing went to 2.83 G. flawlessly.
It is surprising, all of that at stock voltage and with only one case fan,
temperature only rised about 4 or 5 degrees C.
All stable, as it is running stock, but I went back to 2.26 and consider that 2.83 is a good safety top for this processor...


Top
 Profile  
Reply with quote  
 Post subject: Last OCing
PostPosted: Sun May 22, 2005 4:51 pm 
Offline
Pilgrim
Pilgrim

Joined: Thu Aug 12, 2004 6:07 pm
Posts: 2
Ran CPU-Z wasn't overclocked like I had hoped :( , still runnin at 2.4 no matter what I set it at in the BOIS....Oh well.

My rig
2500 Barton OC'ed to a 3200
1024 mem
120 h/d 8mb buffer
GeForce FX 5600 Ultra 128mb
52X Cd Burner
12X DVD rom
Shuttel AN35Ultra m/b
OS's h/d split half Win Xp Pro half Linux 9.2 Pro :D


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun May 22, 2005 9:41 pm 
Offline
Black Belt
Black Belt

Joined: Fri Feb 11, 2005 11:04 pm
Posts: 637
Location: chicago
right now steady 3.44. highest was 3.53, but I only had it like that long
enough to run 3d mark

_________________
DFI Lanparty Venus
Opteron 165 @ 2.8
Thermaltake Big Typhoon
2X1024 G.Skill
ATi 4770
GameXtreme 700W
LG 37" 1080P LCD
Hannspree HW191D widescreen


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Aug 23, 2005 5:10 pm 
Offline
Brown Belt
Brown Belt

Joined: Sun Nov 10, 2002 3:42 pm
Posts: 278
Location: Ararat Vic Australia
Hi folks scored pretty high with my amd.

Proc amd 2600xp (non barton so i found out)
Cooling thermaltake rated at a 64bit 3400
asus a7n8x deluxe rev 2.0
768 mg legend ddr 400 running at 333mhz anything over 402 and it cracks the nanas

settings.
vcore 1.8v
multiplier 12.5
fsb 184
final result was posting and running smooth as at 2300mhz

_________________
core i7 920@4.0ghz
asrock x58 extreme 3
6 gig ocz ddr3 1866mhz @ 1600mhz
evga gtx 460 1gb external exhaust *2
Creative x-fi xtreme gamer
custom watercooling loop for both cpu and gpus


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Aug 23, 2005 8:21 pm 
Offline
Enlightened Master
Enlightened Master

Joined: Wed Dec 11, 2002 2:29 pm
Posts: 14664
Location: Canada
hold on there max - this is with your A64 setup?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Aug 24, 2005 5:15 am 
Offline
Black Belt
Black Belt

Joined: Fri Feb 11, 2005 11:04 pm
Posts: 637
Location: chicago
That was with the P4. Now with the AMD I am running a steady 2.2. I have
gotten up to 2.3, but I can't get any better that that. I tried changing the
RAM/FSB ratio to 8/10 but that did not help. I think that my ram is pretty crappy

_________________
DFI Lanparty Venus
Opteron 165 @ 2.8
Thermaltake Big Typhoon
2X1024 G.Skill
ATi 4770
GameXtreme 700W
LG 37" 1080P LCD
Hannspree HW191D widescreen


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Aug 26, 2005 12:02 pm 
Offline
Black Belt
Black Belt

Joined: Sun Dec 05, 2004 4:52 pm
Posts: 625
Location: In front of a computer.
AMD64 3000+, running @ 2.528GHz, RAM @ DDR466 2.5-4-4-10...
Finally got water-cooling!

_________________
This is a lie.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Aug 30, 2005 3:07 pm 
Offline
Brown Belt
Brown Belt

Joined: Sun Nov 10, 2002 3:42 pm
Posts: 278
Location: Ararat Vic Australia
don't worry max i can't get any higher then 2.3 with my 2600xp (no barton) and thats with $%^!@# legend ram but at 2.3 it was running sweet as.

_________________
core i7 920@4.0ghz
asrock x58 extreme 3
6 gig ocz ddr3 1866mhz @ 1600mhz
evga gtx 460 1gb external exhaust *2
Creative x-fi xtreme gamer
custom watercooling loop for both cpu and gpus


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 225 posts ]  Go to page Previous  1 ... 17, 18, 19, 20, 21, 22, 23  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group