SuperPi Challenge

~Rob · Post by **~Rob** » Fri Apr 08, 2005 1:29 pm

ok... a little better. I used the linked version of superPi this time and...

Memory:
Frequency: 167Mhz
FSB:Ram: 6:5
Cas# Latency: 2.5Clocks
Ras# to Cas# Delay: 3 Clocks
Ras# Precharge: 3 Clocks
Cycly Time(Tras): 7 Clocks

Should I change the memory timings?

Peanya · Post by **Peanya** » Fri Apr 08, 2005 3:03 pm

Oylpann, open up your notepad and change the font, that might do the trick.

Rob, try setting the TRAS to 9, 10, or 11 with the Nforce2 chipset for a small performance boost. Also see if you can get the CAS to 2 and the other timings to 2.

Peanya · Post by **Peanya** » Fri Apr 08, 2005 3:13 pm

Hmm... sorry for the post spam... I was looking at my screenshot and noticed something extremely odd... it's not the voltage of the CPU, which is read wrong. Look at how much memory it shows I have. That's a tad bit off.
I guess the program can't read the info from the AV8 correctly.

Oylpann · Post by **Oylpann** » Fri Apr 08, 2005 4:50 pm

Peanya wrote:Oylpann, open up your notepad and change the font, that might do the trick.

Thanks Peanya, will do! When I get home that is

YouGiveMeRash!!! · Post by **YouGiveMeRash!!!** » Sat Apr 09, 2005 12:42 pm

Seems about right for my Socket 754 build. Im not using the greatest ram in the world either. 1x512mb Geil Value Series PC3200, 1x256mb Geil Ultra Platinum PC3500.

Ryn · Post by **Ryn** » Sun Apr 10, 2005 9:44 am

wow rash, you had your A64 at 2.5Ghz. i have the same stepping at yours but i still can't get past 215FSB. its probably my psu, anyways will still keep on tweaking before i post here again

YouGiveMeRash!!! · Post by **YouGiveMeRash!!!** » Sun Apr 10, 2005 10:17 am

Well actually Ryn, I can get it up to about 2.65 rock stable at 1.65v but since I dont have agp/pci locks, I get video corruption in games.

It works fine at the desktop and while folding, but when i play games the video gets all screwy.

If only I had a socket 754 nforce 3 board, I would be able to take it to 2.7ghz most likely.

I run my A64 at 2.5ghz all the time though.

Ryn · Post by **Ryn** » Sun Apr 10, 2005 10:41 am

YouGiveMeRash!!! wrote: If only I had a socket 754 nforce 3 board, I would be able to take it to 2.7ghz most likely.

well i still have my MSI K8N Neo Platinum lying around here in my room. you can have it if you want but you must get it here in my place hehe

YouGiveMeRash!!! · Post by **YouGiveMeRash!!!** » Sun Apr 10, 2005 6:19 pm

Why did you get rid of the MSI?

Ryn · Post by **Ryn** » Sun Apr 10, 2005 9:15 pm

YouGiveMeRash!!! wrote:Why did you get rid of the MSI?

coz it doesn't have locks on the SATA ports that's hindering me from oc'in