Toolbox utilities and essentials

Get your PC tech problems solved here. Quick response time.

Moderator: The Mod Squad

Postby ether.real » Sun Jul 18, 2004 7:53 am

ether.real
Green Belt
Green Belt
 
Posts: 211
Joined: Sun Jan 13, 2002 1:01 am

Postby video » Tue Aug 03, 2004 3:56 pm

http://www.48bitlba.com/



hardrive install
video
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1492
Joined: Mon Sep 01, 2003 7:23 pm

DRIVE IMAGING SOFTWARE

Postby bruhthaKuga » Mon Aug 16, 2004 7:27 pm

Digital Dolly is a freeware drive imaging utility for home users. It works fine you will just have to read the manual carefully. You will have to make a FAT32 partition to save an image of a NTFS system partition. Don't forget to mount the partition or drive that you want to save to.

http://www.innotrix.com/digital_dolly/download.htm
* GIGABYTE GA-EX58-UD4P Motherboard

* Intel Core i7 920 Nehalem 2.66GHz

* MSI R4670-2D1G/D3 Radeon HD 4670 1GB

* Crucial Ballistix 3GB DDR3

* WD Caviar Blue WD800JD 80G

* Antec EA750

* Samsung LN52A650
bruhthaKuga
Green Belt
Green Belt
 
Posts: 221
Joined: Wed Feb 20, 2002 1:01 am
Location: Alpha Quadrant

Postby Mac4970 » Mon Sep 20, 2004 8:17 pm

Prime95 - http://www.majorgeeks.com/Prime95_d4363.html

"This program is a good stress test for the CPU, memory, L1 and L2 caches, CPU cooling, and case cooling. The torture test runs continuously, comparing your computer's results to results that are known to be correct. Any mismatch and you've got a problem! Note that the torture test sometimes reads from and writes to disk but cannot be considered a stress test for hard drives".

Prime 95 Torture test - an excellent little program for cpu thermal and/or stabilty testing in overclocked or normal system setups.
Mac4970
Pilgrim
Pilgrim
 
Posts: 6
Joined: Mon Sep 20, 2004 11:52 am
Location: Cumbria England

Toggling Screen Saver

Postby trexntx » Wed Sep 22, 2004 7:33 am

Ran across an article in PC World today where it gives a method whereby you can toggle your screen saver with a single click.

Useful for preventing the screensaver from interfering with burning, degragging or other activities without the difficulty of navigating to the dialog box to do it within display properties.

Not sure where it would be best to post this, so if somebody thinks it ought to be moved then by all means go right ahead.

http://www.pcworld.com/howto/article/0, ... 423,00.asp
Antec NeoHE 550
AMD 64 X2 4600+
ASUS A8N-SLI DELUXE
Corsair XMS (2X512)
Maxtor SATA (2x300GB) RAID 0
trexntx
Black Belt 5th Degree
Black Belt 5th Degree
 
Posts: 8012
Joined: Wed Mar 10, 2004 7:22 am
Location: Fort Worth

Postby Hardware Junkie » Thu Sep 23, 2004 6:49 am

"Imagination is the only weapon in the war against reality." -Jules de Gautier

Image
Hardware Junkie
Mobo-fu Master
Mobo-fu Master
 
Posts: 19405
Joined: Thu Jan 25, 2001 1:01 am
Location: 00000h - 0000Fh

Postby Ryn » Sat Oct 09, 2004 4:37 pm

Ryn
Black Belt 4th Degree
Black Belt 4th Degree
 
Posts: 4390
Joined: Sun Jan 11, 2004 3:29 am
Location: Manila, Philippines

Postby Aussie » Sat Oct 16, 2004 7:10 am

Startup Library list:-

http://startup.iamnotageek.com/



Aussie
Our lives begin to end the day we become silent about things that matter - Martin Luther King
Aussie
Mobo-fu Master
Mobo-fu Master
 
Posts: 10244
Joined: Mon Nov 22, 1999 1:01 am
Location: Mackay, Queensland, Australia

Re: System Fan GA7ZX

Postby Sabrewings » Wed Oct 27, 2004 9:43 pm

Sabrewings
Mobo-fu Master
Mobo-fu Master
 
Posts: 18948
Joined: Thu Jan 15, 2004 3:04 am
Location: Barksdale AFB, LA

Postby Karlsweldt » Thu Oct 28, 2004 5:58 am

Lots of good suggestions for "software" tools, but no "hardware" tools.
If I may add, the "good" computer toolbox should not be without a few different types of Hemostats, for picking up those dropped parts in tight places, or removing/installing the jumper caps on pinset headers. Also a decent-sized pair of end-nipper pliers, to cut protruding wire ends from circuit boards. Work well at squeezing the "arms" on plastic standoffs for removal. Crutchfield's catalog is one source.. there are many others, including medical supply houses, for the Hemostats. The pliers and other tools are available at most hardware stores. A pair of "chip poppers" similar to the ones made for removing the older '486' CPUs will be of assistance in removing any CPU from its socket, if you have no fingernails to get under the chip. Gently, of course!
Karlsweldt
Mobo-fu Master
Mobo-fu Master
 
Posts: 20662
Joined: Wed Nov 12, 2003 11:57 am
Location: 07438

PreviousNext

Return to Tech Support

Who is online

Users browsing this forum: Google [Bot] and 2 guests