Need help identifying motherboard

mrbear55 · Post by **mrbear55** » Fri Feb 06, 2004 12:26 am

I am trying to find some info on a board that I have but am unable to figure out who the manufacturer is. The board has:
1 - agp slot
1 - amr slot?
5 - pci
1 - isa
3 - slots for pc100/pc133 memory
1 - socket A
1 - ps/2 keyboard
1 - ps/2 mouse
2 - IDE headers (one blue the other white)
1 - floppy header (black)
2 - usb ports
2 - 9 pin serial ports
1 - parallel port
onboard sound with midi connector above the sound connectors

There is only one sticker on the board that says KT133BX. There is a revision number on the top of the board that says 1.2(in lower left corner if the cpu is on top looking at it). There is a sticker on the ISA slot that says MI12KT133BX02 as well as an award bios sticker that says © 1998 PCI/PNP686 245212526. There is one visable VIA chip that has on it VT82C686B on it . There is another chip that is covered by a gold heatsink with the writing VT8363/VT8365 written below it on the board.

boheemee · Post by **boheemee** » Fri Feb 06, 2004 12:41 am

There is only one sticker on the board that says KT133BX.

Azza KT133BX

Looking for info

boheemee · Post by **boheemee** » Fri Feb 06, 2004 3:09 am

well, i can't seem to find a working link to info on this board......need some help here......is this board the same as the KT3-AV, they look to be the same.....

inteljunky · Post by **inteljunky** » Fri Feb 06, 2004 3:46 am

i got it, here is the link.
thank goodness for internet archiving
link

boheemee · Post by **boheemee** » Fri Feb 06, 2004 3:58 am

thanks inteljunky, completely forgot about the archives...duh

mrbear55 · Post by **mrbear55** » Fri Feb 06, 2004 10:55 pm

You guys rock!!! That is the exact board I have. Now maybe I can the info I have been trying to find out for upgrades.

Thanks

Post by **evasive** » Sat Feb 07, 2004 12:42 pm

at the moment there's a copy here:
http://mobokive.dyndns.org/Uploads/azza ... TX-E2B.PDF

most likely it will end up in the archive.