The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Fri Sep 21, 2018 2:29 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 225 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 23  Next
Author Message
 Post subject:
PostPosted: Fri Mar 14, 2003 1:56 am 
Offline
Black Belt
Black Belt

Joined: Tue Oct 22, 2002 9:07 pm
Posts: 584
Location: Melbourne, Australia
When room temp is 40 degrees celsius anyway, even the best heatsink is fighting an uphill battle. :lol:

Seriously, my temp sits @ 50 celsius under load. Do you think it should be lower? I'm think the heatsink is pretty well seated (with AS3), though I have been wondering about the temps myself.

I have two intake at the bottom front at about 3000rpm, an exhaust top back at 3600, and an exhaust on the PS (Antec Truepower 380)

My Vcore is at 1.55. What do you think? Reseat the CPU?

I can update these temps with farenheit tonight when I get home, I'll include case temps too...

_________________
"I disapprove of what you say, but I will defend to the death your right to say it"

-Voltaire


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 14, 2003 3:02 am 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Tue Sep 12, 2000 12:01 am
Posts: 14276
Location: L-1 Bridge
hypnotik, I'd definitely reseat the heatsink. Not that 50° C is bad under load, but I know the V7+ does better than that. What fan speed to you have it set on?

_________________
The Gift of Healing
Conscious Energy Meditation


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 14, 2003 3:27 am 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14301
Location: Maine
Here is the specs on the computer I am on now.

Asus P2B
PII-300 (OC'ed to 450)
128MB of generic PC100 RAM
GeForce2MX-400 (64MB)

latest beta BIOS

Toby

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 14, 2003 5:01 am 
Offline
Mobo-fu Master
Mobo-fu Master

Joined: Tue Sep 12, 2000 12:01 am
Posts: 14276
Location: L-1 Bridge
Oh man, Toby. I think it's time for a serious upgrade! :wink:

_________________
The Gift of Healing
Conscious Energy Meditation


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 14, 2003 5:15 am 
Offline
Lead Mobo-fu Master
Lead Mobo-fu Master

Joined: Sun Dec 16, 2001 1:01 am
Posts: 14301
Location: Maine
Tolemac wrote:
Oh man, Toby. I think it's time for a serious upgrade! :wink:
In due time Tolmac :lol: ......... This system is a spare cause my main machine (the Compaq) took a poop and havent gotten it fixed yet :roll:

I actually got a sweet looking board that I am wanting to use in my next build - a Shuttle AK37GT/R just cant afford to build it at this time........

Toby

_________________
Compaq-Fu Master
Ctechinfo funding drive information


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 21, 2003 2:13 pm 
Offline
Green Belt
Green Belt

Joined: Tue Apr 02, 2002 1:01 am
Posts: 140
Location: Blairsville, Ga
First System

MOBO: Asus A7V133

CPU: AMD 950 T-bred

Ram: 512 PC133 Muskin

HSF: Thermalright AX-7

Bios settings: 139 fsb/ 10.5 multiplier/ CAS 2.5 all else on fastest settings.
Not to shabby for an old 133a board

Second System

MOBO: EP-8K3A+

CPU: AMD 1900 (AGOGA stepping)

RAM: 512 OCZ PC2700 Cas2.5

HSF: SLK-800

Bios Settings: 148 fsb/ 13 multiplier cas 2.5 all else set fastest. Gotta find the extra head room to hit 2Ghz.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Mar 22, 2003 9:07 pm 
Offline
Initiate
Initiate

Joined: Tue Feb 11, 2003 11:28 am
Posts: 75
Location: evans, colorado
main 2400xp @ 2167mhz , secondary 1800xp pally 1885mhz pc2100

_________________
3500+ Asus A8V
ATI X800XTPE
1gb Corsair PC3200LL


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Mar 28, 2003 8:23 pm 
Offline
Black Belt
Black Belt

Joined: Sat Mar 23, 2002 1:01 am
Posts: 561
I think I beat all of you for an XP chip :

now admitidly, I am using a koolance watercooling system, but still, this would qualify as a damn good overclock.

MOBO: Epox EP-8RDA

CPU: AMD 2100+, TbredB

Ram: 2x256 PC2100, Crucial

HSF: watercooling block

Bios settings: 133FSB, 18 multiplier, 1.7v.

now, that's a 700 MHZ increase! from a default of 1.7 to 2.4. and that's JUST with the multiplier settings! the board won't post at a multiplier of 19 (was hoping, heh) but with the proper voltage, I can get it to work at 18. probably with adjusting the FSB settings, I could probably get it even higher..

that's going from a 2100+ to a 3000+ :)

(since AMD's PR ratings are not exactly linear. I checked the rating at http://www.ocinside.de/html/workshop/am ... ct_id.html).
________
Michigan Dispensary


Last edited by andrey on Sun Mar 06, 2011 1:06 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Apr 02, 2003 4:30 am 
Offline
Initiate
Initiate

Joined: Sun Jan 26, 2003 3:00 am
Posts: 86
Pentium 1.6A Overclocked 2942ghz at 1.85voltage 50c ldle 56c load

Abit IT7 Max2 Ver2 - moded bios
Radeon 9700Pro- Moded 9800pro
GeIL 256mb 1 stick pc3700 4ns- running at 501mhz at 3.1voltage
D-Tek watercooling

2 sticks GeIl pc3700 can only oc to 2.7ghz


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Apr 03, 2003 5:57 pm 
Offline
Green Belt
Green Belt

Joined: Tue Jun 18, 2002 7:45 am
Posts: 119
its been awhile since i posted here but here i go:

MOBO: Albatron 845PEV Pro
CPU: P4 1.8A Ghz
RAM: 256mb Crucial PC2700
HSF: Watercooled by Maze3/MaxiJet1200/Ford F150 Heatercore Load: 37c Idle: 32c

MY OC'ing

i was able to push my chip up to 3Ghz w/1.65v
my memory benchmarks
here are my temps
here are some pics of my system: installed, installed 2, and my waterblock.
here is my new 3DMark2001

_________________
P4 1.8Ghz/ OC'ed 3.07 w/1.65v
Watercooled by: Maze3, Maxijet1200 & F150 Heatercore Temp: Load: 37c Idle:32c
Albatron PX845PEV Pro
Crucial 256mb PC2700
SoundBlaster X-Gamer


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 225 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 23  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group