Help PLz with ID of Gateway MoBo

The place to post if you are having trouble identifying your motherboard.

Moderator: The Mod Squad

Help PLz with ID of Gateway MoBo

Postby TISM » Tue May 14, 2002 1:26 am

MoBoard details I can find so far:-
Pentium II 266 (Side Edge Connector type)
Pheonix Bios for Intel (date 31/03/98, so says ctBios)
OEM = Intel (says ctBios)
3 x ISA slots
4 x PCI slots
1 x AGP
Barcode Number : IUAL82602890 AA 681534-403

Is there anything more I can look for?

I will appreciate any assistance.
TISM
Pilgrim
Pilgrim
 
Posts: 3
Joined: Tue May 14, 2002 1:20 am

Postby Aussie » Tue May 14, 2002 4:17 am

Our lives begin to end the day we become silent about things that matter - Martin Luther King
Aussie
Mobo-fu Master
Mobo-fu Master
 
Posts: 10244
Joined: Mon Nov 22, 1999 1:01 am
Location: Mackay, Queensland, Australia

Postby evasive » Tue May 14, 2002 8:47 am

IxALnnnnnnnnnn

AL = AL440LX, so a Phoenix bios and an other board.

Product Page

Image

Intel AL440LX support page

Bill Selk's AL440LX tweak pages
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby TISM » Tue May 14, 2002 11:42 pm

evasive - thats the one. Lovely work.

Thanks for your help guys.
TISM
Pilgrim
Pilgrim
 
Posts: 3
Joined: Tue May 14, 2002 1:20 am

Postby Aussie » Wed May 15, 2002 4:29 am

3 x ISA slots
4 x PCI slots
1 x AGP


Who can't count their slots eh? :lol:


Aussie
Our lives begin to end the day we become silent about things that matter - Martin Luther King
Aussie
Mobo-fu Master
Mobo-fu Master
 
Posts: 10244
Joined: Mon Nov 22, 1999 1:01 am
Location: Mackay, Queensland, Australia

Postby TISM » Wed May 15, 2002 4:56 am

Very true. Sorry.

Being a fellow queenslander I thought I'd test you out. :)
TISM
Pilgrim
Pilgrim
 
Posts: 3
Joined: Tue May 14, 2002 1:20 am

Postby Aussie » Wed May 15, 2002 6:30 am

I recently set up two of these boards, one is now running a Celeron 566MHz and the other a Celeron 700MHz.

No fancy tricks involved I just used the latest Intel bios and a slotket with voltage adjustment jumpers. Setting the voltage jumpers on the slotket for the default Vcore voltage for each of these CPU's enabled them to work on these boards.

I was amazed that the voltage regulator on these boards was able to go right down to the 1.5 volts necessary for the 566.

First time I've been able to get an FC-PGA CPU working on an LX chipset slot 1 board using a standard slotket.

The processors are incorrectly reported by the bios as Pentium Pro CPU's but are correctly identified within Windows. Both boards are running as smooth as silk - no problems at all.


Aussie
Our lives begin to end the day we become silent about things that matter - Martin Luther King
Aussie
Mobo-fu Master
Mobo-fu Master
 
Posts: 10244
Joined: Mon Nov 22, 1999 1:01 am
Location: Mackay, Queensland, Australia

Postby evasive » Wed May 15, 2002 8:08 am

NOW do you understand why I have an Intel board in my system? Sheer quality and stability...
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Aussie » Wed May 15, 2002 8:17 am

Sheer quality and stability...


True, terribly boring boards though, I prefer the "tweakability" of Abit boards and that is what I have always run in my personal machines. Intel wants you to play by the rules all the time. :lol:


Aussie
Our lives begin to end the day we become silent about things that matter - Martin Luther King
Aussie
Mobo-fu Master
Mobo-fu Master
 
Posts: 10244
Joined: Mon Nov 22, 1999 1:01 am
Location: Mackay, Queensland, Australia

Postby evasive » Wed May 15, 2002 12:50 pm

Oh but then it would fit my personality perfectly ;)

A good thing I don't have an Alton board, I could start a flame war out of nothing :twisted:
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands


Return to Motherboard Identification Forum

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron