The Mother Board

Motherboards.org forums. Free tech support, motherboard ID, and more.
It is currently Thu Aug 16, 2018 12:49 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sun Jul 05, 2009 4:44 am 
Offline
Black Belt
Black Belt

Joined: Mon May 18, 2009 7:20 am
Posts: 570
Heres the steps taken to dismantle the Logitech MX518 Gaming Mouse. We're painting it with a Carbon Fiber effect
Image

You will find 3, marked cross patterns for screw locations, using blade
Image

Image


Once opened, these 6 screws must be removed. 3 fasten in the switch for the right hand buttons
Image

After removing right side button switch, 3 more screws are located beneath and must be removed
Image

Before you can remove the MX518 mouse cover, you may have to push up the left/right mouse buttons up to clear the mouse body.
Then, gently, pull the cover off towards the rear of the mouse.
Image

Apply masking alongside the MX518 Logitech emblem before prying off emblem with small flat head screwdriver.
Image

To fill in the emblem hole, I'm using Evercoat, Metalworks, Polyester Glazing Putty with Blue Cream Hardener (not pictured)
Image

Filling emblem hole of MX518. After mixing 1/4" size drop of Evercoat with dab of Blue Cream Hardener (not pictured)
Image

If you apply too much filler, use paper towel to wipe off excess filler.
Image

Allow filler to cure for 60 mins before sanding w/ 400 grit sandpaper
Image

BEFORE PAINTING: USE THE PROPER SAFETY PRECAUTIONS

1. Wear Filtered Respirator Mask, Approved For Applying Automotive Aerosols

2. Work in Well Ventilated Area

5 coats of Rustoleum Sandable Primer (or until surface is filled)... allow to cure for at least 2 hours
Image

Scuff the final coat sandable primer with 400 grit sandpaper before applying base color coat
Image

The base color coat will be ISUZU factory color "Pewter" by PPG
Image

PPG Automotive paint applied with HVLP spray gun
Image

Image

Gloss Black painted applied over rubber mesh (tool box liner) creates carbon fiber weave pattern
Image

Image

Light coats of Gloss Black will blend in the weave pattern
Image

Polyurethane clearcoat applied for maximum durability and shine
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Jun 01, 2012 1:18 am 
Offline
Pilgrim
Pilgrim

Joined: Fri Jun 01, 2012 1:11 am
Posts: 2
Wow! I never thought of having my computer mouse be personalized. Nice done dude! Let me do it for myself also.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Jul 31, 2012 5:47 pm 
Offline
Black Belt
Black Belt

Joined: Mon May 18, 2009 7:20 am
Posts: 570
Glad you liked it!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Apr 29, 2013 10:00 pm 
Offline
Pilgrim
Pilgrim

Joined: Fri Apr 26, 2013 3:52 am
Posts: 1
Awesome! Thanks for that! Useful and competent to in this nation.., It is up in quality as well.




.....................................................
Aries86


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group