integrated graphics

For discussions related to the main web site or the forum itself are now combined into one to clean things up a bit..

integrated graphics

Postby sirchone » Mon Nov 18, 2002 10:08 am

I would like to see comparison of the nforce2 boards against other integrated solutions (ie xabre, sis, intel )
sirchone
Brown Belt
Brown Belt
 
Posts: 360
Joined: Wed Oct 23, 2002 6:17 pm

an idea

Postby Rominof » Mon Nov 18, 2002 8:25 pm

have know results but the best curent inigrated solution is the n-force but the 9000 mobility is mutch better (for labtops though)

P.S.
I wouldn't personaly use inigreated except to save a pretty penny as fare a i am conncerned exsternal is mutch better for now
Rominof
Initiate
Initiate
 
Posts: 71
Joined: Mon Nov 04, 2002 5:27 pm

Postby sirchone » Wed Nov 20, 2002 6:52 pm

I believe the Nforce2 is also but I would like to see actual numbers by a third party. Look at it this way, if the difference between nforce2 and a KT400A with xabre is only a few frames would you pay more for the nforce.
sirchone
Brown Belt
Brown Belt
 
Posts: 360
Joined: Wed Oct 23, 2002 6:17 pm

Postby Wudce » Thu Dec 12, 2002 4:31 am

The onboard video of the nForce ICP is that of a gForce 4 MX using up to 128 megs of main memory, I don't think there a better onboard video solutions out there at this time 8)
Wudce
Wudce
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1298
Joined: Thu Nov 22, 2001 1:01 am
Location: Fayetteville NC

Postby Valour » Thu Dec 12, 2002 7:24 am

It's worth mentioning that not all nForce2 boards have onboard video.

-Jem
"The proverb says that Providence protects children and idiots. This is really true. I know because I have tested it." -Mark Twain

I wrote this book: www.herotale.com
And here's the next one: www.emeraldblackbird.com
Valour
Black Belt 2nd Degree
Black Belt 2nd Degree
 
Posts: 2893
Joined: Sat Oct 05, 2002 6:24 pm
Location: Rochester, NY USA

Postby Wudce » Thu Dec 12, 2002 5:55 pm

SPP=Non onboard video, ICP=board with onboard video :wink:
Wudce
Wudce
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1298
Joined: Thu Nov 22, 2001 1:01 am
Location: Fayetteville NC

Postby Valour » Thu Dec 12, 2002 7:27 pm

Wudce wrote:SPP=Non onboard video, ICP=board with onboard video :wink:


I wasn't talkin' to you! :P

-Jem
"The proverb says that Providence protects children and idiots. This is really true. I know because I have tested it." -Mark Twain

I wrote this book: www.herotale.com
And here's the next one: www.emeraldblackbird.com
Valour
Black Belt 2nd Degree
Black Belt 2nd Degree
 
Posts: 2893
Joined: Sat Oct 05, 2002 6:24 pm
Location: Rochester, NY USA

Postby sirchone » Sat Jan 04, 2003 2:59 am

Yes I know ( Nforce2 with graphics may not be out to spring 2003) but this was just a suggestion for comparison of the newer boards with integrated graphics( I have looked at one with xabre graphics card that has it;s on onboard memory and doesn't use the system memory) and I thought it would be nice to see a side by side comparison.

BTW thanks for all comments

Lots of people don't know that a frame rate of 30 is adequate for most game and once the frame rate gets over 60 per second the human eye can not tell it.
sirchone
Brown Belt
Brown Belt
 
Posts: 360
Joined: Wed Oct 23, 2002 6:17 pm


Return to Motherboards.org Web Site

Who is online

Users browsing this forum: No registered users and 3 guests