SuperPi Challenge

Techniques, tips, and advice for the performance PC enthusiast on overclocking.

Moderator: The Mod Squad

Postby Peanya » Thu May 19, 2005 6:19 am

Tulatin not updating this any more?
Peanya
Black Belt 5th Degree
Black Belt 5th Degree
 
Posts: 6055
Joined: Fri Feb 07, 2003 7:43 pm

Postby Tulatin » Thu May 19, 2005 12:46 pm

tulatin will, but like he said the file is lost. He's also been quite busy. If you'll be patient, it'll be done. Thank You. :D
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby headofmax » Sun May 22, 2005 11:47 am

I got new ram

new time 39.511 with mushkin pc3200ddr
also OC'd to 3.44ghz
Will post pic later
DFI Lanparty Venus
Opteron 165 @ 2.8
Thermaltake Big Typhoon
2X1024 G.Skill
ATi 4770
GameXtreme 700W
LG 37" 1080P LCD
Hannspree HW191D widescreen
headofmax
Black Belt
Black Belt
 
Posts: 637
Joined: Fri Feb 11, 2005 11:04 pm
Location: chicago

Postby Tulatin » Sun May 22, 2005 4:43 pm

Rebuilding now.
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby Tulatin » Sun May 22, 2005 5:29 pm

Rebuilt. I'll be in second in 15 minutes.

Barely, Just barely. Shoot folding, gain a third of a second.

Image

Me is guilty of hubris :(
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby Ryn » Fri Jun 03, 2005 12:54 am

here is an addition for my oc'ed Mobile AthlonXP 2400+

Image

specs:
DFI Nforce2 Ultra Infinity
Twinmos DDR400 2x256MB
Task 350W PSU
Ryn
Black Belt 4th Degree
Black Belt 4th Degree
 
Posts: 4390
Joined: Sun Jan 11, 2004 3:29 am
Location: Manila, Philippines

Postby ThEvil0nE » Fri Jul 15, 2005 9:04 pm

My 3800+ Rev. E only on the 30s :? This is as stable as it went...

Image
Timings: http://i3.photobucket.com/albums/y60/Th ... 280x10.jpg

Her's the default settings: http://i3.photobucket.com/albums/y60/Th ... efault.jpg
Image Image
ThEvil0nE
Black Belt 3rd Degree
Black Belt 3rd Degree
 
Posts: 3937
Joined: Mon May 06, 2002 12:01 am
Location: New York

Postby Tulatin » Sat Jul 16, 2005 6:51 pm

EvilOnE - get that RAS to CAS latency down, and run in realtime, you should be able to JUST make it under 30s.
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby lilpaki » Sun Jul 17, 2005 5:46 am

2 questions... wat you mean run in realtime?
and for thouse of you out there with a asus a8n sli, how do you set the cpu/ram ratios? i got the 1011 bios.

thanks for ya time
to build or not to build,
that is the question?
lilpaki
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1342
Joined: Sun Nov 21, 2004 7:06 am
Location: london

Postby Tulatin » Sun Jul 17, 2005 7:47 am

Run in realtime = open up the task manager, go under proccesses, right click superpi.exe, and select realtime from the priority menu.

As to setting CPU/RAM ratios on the A8N-SLI, go under CPU Configuration in the advanced menu, and your ratios will be under DRAM Configuration, with the heading Memclock Index Value (as seen here). Now, bear in mind that i NEVER could get DDR333 to work, so if you want to use that ratio, you're going to have to set it to DDR266, then up it with A64 Tweaker in windows. As to respective ratios, DDR333 is 5:4, DDR266 is 3:2 and DDR200 is 2:1

Finally, if you're solder savvy (or confident, or can have it done by another) there's a few voltmods you can do to the board to improve performance. THe general consensus on these motherboards is that the HTT WILL NOT break the 300MHz mark - a voltmod near the chipset fixes that, and likewise there's a RAM voltmod to boost and stabilize ram voltages. I did the chipset one, but i think i killed the mobo by making the new sink (zalmy passive) rock and chip the chipset. IF you want the guides for the V-mods, i can PM them to you
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

PreviousNext

Return to Overclockers Anonymous

Who is online

Users browsing this forum: No registered users and 1 guest