What is your highest overclock?

Techniques, tips, and advice for the performance PC enthusiast on overclocking.

Moderator: The Mod Squad

Postby PhantomMenace » Fri Aug 22, 2003 1:20 am

here ya go:

Image

what chip are u running and would u know what the Sspec on ur chip?
P4 1.8Ghz/ OC'ed 3.07 w/1.65v
Watercooled by: Maze3, Maxijet1200 & F150 Heatercore Temp: Load: 37c Idle:32c
Albatron PX845PEV Pro
Crucial 256mb PC2700
SoundBlaster X-Gamer
PhantomMenace
Green Belt
Green Belt
 
Posts: 119
Joined: Tue Jun 18, 2002 7:45 am

Postby Tulatin » Sat Aug 23, 2003 5:18 pm

Is your chip unlocked? Becuase a multiplier of 18 on a C grade chip would be a 2.6C not a 2.4C. I've got a northwood 2A./
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby PhantomMenace » Sun Aug 24, 2003 10:39 pm

na mine isnt locked.... here is the sspec code SL6D7

http://processorfinder.intel.com/script ... Spec=sl6d7
P4 1.8Ghz/ OC'ed 3.07 w/1.65v
Watercooled by: Maze3, Maxijet1200 & F150 Heatercore Temp: Load: 37c Idle:32c
Albatron PX845PEV Pro
Crucial 256mb PC2700
SoundBlaster X-Gamer
PhantomMenace
Green Belt
Green Belt
 
Posts: 119
Joined: Tue Jun 18, 2002 7:45 am

Postby Tulatin » Mon Aug 25, 2003 12:50 pm

No wonder - it's a B chip = a 533 one - i thought it was an 800c one! Stupid me.
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby PhantomMenace » Mon Aug 25, 2003 3:47 pm

ive read that some ppl w/2.0A were able to go beyond 3ghz but thats with the C1 stepping and different mb. my 1.8A did 3ghz on my BD-7 and Albatron board but would crap out anything higher than 169 fsb. :\ so im pretty sure it reached its limit.
P4 1.8Ghz/ OC'ed 3.07 w/1.65v
Watercooled by: Maze3, Maxijet1200 & F150 Heatercore Temp: Load: 37c Idle:32c
Albatron PX845PEV Pro
Crucial 256mb PC2700
SoundBlaster X-Gamer
PhantomMenace
Green Belt
Green Belt
 
Posts: 119
Joined: Tue Jun 18, 2002 7:45 am

Postby Tulatin » Mon Aug 25, 2003 4:07 pm

Mine topps at 2.95 - with the4 max voltage, it just WONT boot - it starts the beeping wail of death..
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby Peanya » Tue Aug 26, 2003 5:27 am

Ok I tinkered with mine some more... both of them! As the siggy says, 2.2GHz and 440MHz FSB. I'll try pushing the FSB up more, but I can't get this CPU beyond 2.2GHz stable. I also got my 2nd comp using an XP2600 to 10.5 x 200 with the Asus board, and it's stable. The Asus is using OCZ's wonderful PC2700 memory overclocked at a 6,3,3,2 timings.
Peanya
Black Belt 5th Degree
Black Belt 5th Degree
 
Posts: 6055
Joined: Fri Feb 07, 2003 7:43 pm

Postby Ripshod » Fri Sep 05, 2003 3:05 pm

Okay, finally got it stable. Here's the rundown:-

MOBO: Gigabyte GA-7VAXP

CPU: Athlon XP2000+ Thoroughbred

Ram: 1GB 266DDR ram (non-specific OEM) (the cheapest I could get)

Cooling: Thermaltake Volcano 7 (max 56degrees under load)

BIOS Settings: 156MHz FSB/11.5x multiplier/CAS 2.5, everything else on normal settings.

This may not be my fastest but this is the most stable o/c I've done to date, and it's my current config. I don't think I've done too bad what with the reputation of this KT400 board.
CALL &BD19 (If you need to ask you don't need to know)
Image
Ripshod
Black Belt
Black Belt
 
Posts: 708
Joined: Wed Aug 13, 2003 2:57 pm
Location: Yorkshire, UK

Postby Tulatin » Fri Sep 05, 2003 3:37 pm

dude - you should just do it 250x9...
Tulatin
Enlightened Master
Enlightened Master
 
Posts: 14664
Joined: Wed Dec 11, 2002 2:29 pm
Location: Canada

Postby Peanya » Fri Sep 05, 2003 6:12 pm

If my motherboard has it, I'm gonna try 250x8.5.. the CPU doesn't wanna run over 2.2GHz
Peanya
Black Belt 5th Degree
Black Belt 5th Degree
 
Posts: 6055
Joined: Fri Feb 07, 2003 7:43 pm

PreviousNext

Return to Overclockers Anonymous

Who is online

Users browsing this forum: No registered users and 1 guest