I NEED to identify this baby

The place to post if you are having trouble identifying your motherboard.

Moderator: The Mod Squad

I NEED to identify this baby

Postby rascard2007 » Tue Jun 12, 2007 11:01 am

Form factor Micro ATX
chpsiet PC133 GFXPro (HT2543CB1)
Bios AMI
Socket 370

other chips on oboard:
SIS 900
HSP56
PCNet (HT2001)

Slots:
3 PCI
2 DIMM SDRAM (168 pins)

Conectors:
2 PS2
2 USB
Lan
VGA
Serial
Parallel
game port
audio

I thnik It´s a pcchips mobo, but I can´t identify the model

thanks from havana, cuba
rascard2007
Black Belt
Black Belt
 
Posts: 720
Joined: Tue Jun 12, 2007 10:47 am
Location: Havana, Cuba

Postby evasive » Tue Jun 12, 2007 8:02 pm

PC Chips M754LMR perhaps? It is a PC Chips, that is for sure.

Image
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby filecore » Wed Jun 13, 2007 1:25 am

It's usually printed on the board somewhere, look for codes down by the PCI slots or occasionally near the memory slots. I've pretty much never seen a board without some identifying codes printed on it. This is where Google is your friend.
Home server: Asus P5Q Pro, Core2Quad, 8GB DDR2, ENGTX260 876MB, Zalman 800w, Antec P180 case, 2x1TB and 2x2TB Samsung Spinpoint F1, Windows 7 64-bit, etc

Work server: HP ProLiant ML350 G6, hexacore Xeon E5645 2.4GHz (12 logical cores), 16GB DDR3, 3x300GB SAS RAID5, Server 2008 R2, nVidia GT560Ti 1GB for Hyper-V RemoteFX acceleration
filecore
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1092
Joined: Mon Dec 29, 2003 10:35 am
Location: Trapped inside a virtual machine.

Postby Toby B. » Wed Jun 13, 2007 3:21 am

I've pretty much never seen a board without some identifying codes printed on it.
Haven't seen too many PC Chips boards then huh?? :lol: :lol: :lol:
Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master
 
Posts: 14277
Joined: Sun Dec 16, 2001 1:01 am
Location: Maine

Postby filecore » Wed Jun 13, 2007 3:25 am

As a matter of fact, no...
Home server: Asus P5Q Pro, Core2Quad, 8GB DDR2, ENGTX260 876MB, Zalman 800w, Antec P180 case, 2x1TB and 2x2TB Samsung Spinpoint F1, Windows 7 64-bit, etc

Work server: HP ProLiant ML350 G6, hexacore Xeon E5645 2.4GHz (12 logical cores), 16GB DDR3, 3x300GB SAS RAID5, Server 2008 R2, nVidia GT560Ti 1GB for Hyper-V RemoteFX acceleration
filecore
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1092
Joined: Mon Dec 29, 2003 10:35 am
Location: Trapped inside a virtual machine.

Postby Toby B. » Wed Jun 13, 2007 3:46 am

filecore wrote:As a matter of fact, no...
PC Chips boards generally have no identifying marks (at least the older stuff), like the model number printed on the board like most Abit, FIC, etc boards do. There are some standard parts that make it easy to ID it as PC Chips. such as no identifying marks, the Chipset (in this case GFXpro), and more.
Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master
 
Posts: 14277
Joined: Sun Dec 16, 2001 1:01 am
Location: Maine

Postby rascard2007 » Wed Jun 13, 2007 5:38 am

Well tahnks it´s a M754LMR and don´t have any print of the model, only de release version 1.5B, as usual in the old PCChips boards.

I´ve an additional problem, I got a Celeron 1 GHz CPU (Tualatin) and the latest update of the bios says that a Celeron 950 - 1100 MHz must work.

I put it in the socket, but I can´t figure out how set the jumpers to match the bus speed and the multiplier needed for 10 x 100 MHz that my CPU requires.

Help me, please
rascard2007
Black Belt
Black Belt
 
Posts: 720
Joined: Tue Jun 12, 2007 10:47 am
Location: Havana, Cuba

Postby evasive » Wed Jun 13, 2007 8:57 pm

Could be an M756LMR too. Cannot find anything about a rev 1.5B on M754LMR.
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Karlsweldt » Thu Jun 14, 2007 7:04 am

Specs link.
BIOS link.
Mobo drivers.
I have a set of drivers for the M755LMR model. Uses the Sis 630/300 chipset family. The 6 zipped files run a bit over 10 megs.
Karlsweldt
Mobo-fu Master
Mobo-fu Master
 
Posts: 20659
Joined: Wed Nov 12, 2003 11:57 am
Location: 07438

Postby filecore » Thu Jun 14, 2007 11:01 am

You know, whenever I see the topic of this thread, I keep wanting to say "Sorry, this is a computer forum, we don't do genetic parentage tests".
Home server: Asus P5Q Pro, Core2Quad, 8GB DDR2, ENGTX260 876MB, Zalman 800w, Antec P180 case, 2x1TB and 2x2TB Samsung Spinpoint F1, Windows 7 64-bit, etc

Work server: HP ProLiant ML350 G6, hexacore Xeon E5645 2.4GHz (12 logical cores), 16GB DDR3, 3x300GB SAS RAID5, Server 2008 R2, nVidia GT560Ti 1GB for Hyper-V RemoteFX acceleration
filecore
Black Belt 1st Degree
Black Belt 1st Degree
 
Posts: 1092
Joined: Mon Dec 29, 2003 10:35 am
Location: Trapped inside a virtual machine.

Next

Return to Motherboard Identification Forum

Who is online

Users browsing this forum: Bing [Bot] and 3 guests