Mystery Intel Board!

The place to post if you are having trouble identifying your motherboard.

Moderator: The Mod Squad

Mystery Intel Board!

Postby wrgunny » Mon Jul 28, 2003 2:15 pm

:cry:

I recently traded a local guy for an Intel Socket 478 Motherboard, which I am at a loss to identify. The board appears to be an OEM board (possibly Dell?) and as best I can tell is based very closely to the intel 845GLVA. It does have an Intel 845GL Chipset, DDR Support, Onboard Audio/Video/Lan, 3PCI Slots and that is it. The numbers on the board are as follows. White Label w/barcode #CN-07W080-70821-285-G075, REV:A00. The Numbers painted on the board itself are P/N: 411716900011. I have been all over the web looking for information on this board to no avail. Good luck guys!!
Thomas R Grace
wrgunny
Pilgrim
Pilgrim
 
Posts: 5
Joined: Mon Jul 01, 2002 3:36 pm

Postby Mr T » Mon Jul 28, 2003 2:40 pm

I have been programming on computers since the ZX81.
I am an apprentice trained Electronics Engineer with qualifications to back it up.
I have been repairing computers since 1996.
Yet to some people I still know nothing...
Mr T
Enlightened Master
Enlightened Master
 
Posts: 17092
Joined: Fri Jun 14, 2002 1:03 am
Location: England

Postby evasive » Mon Jul 28, 2003 4:58 pm

Nope. This is a MiTAC. Checking...
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby evasive » Mon Jul 28, 2003 5:01 pm

6813BU out of a Dell Dimension 2300 or 2350. Ask Dell.
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Mr T » Mon Jul 28, 2003 6:20 pm

P/N: 411716900011
Dell part no? If it is seems unusual.... 8O
I have been programming on computers since the ZX81.
I am an apprentice trained Electronics Engineer with qualifications to back it up.
I have been repairing computers since 1996.
Yet to some people I still know nothing...
Mr T
Enlightened Master
Enlightened Master
 
Posts: 17092
Joined: Fri Jun 14, 2002 1:03 am
Location: England

Postby evasive » Tue Jul 29, 2003 1:36 am

No, that is the MiTAC one...
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Bummer

Postby wrgunny » Tue Jul 29, 2003 4:08 pm

Ok, so this is a Dell board? I was afraid of this, and I guess I can also assume that the funny looking plug just below the Primary IDE port is for the front switch panel? or am I lucky enough to find the switch panel on the bottom of the board as it should be?
Thomas R Grace
wrgunny
Pilgrim
Pilgrim
 
Posts: 5
Joined: Mon Jul 01, 2002 3:36 pm

Postby evasive » Tue Jul 29, 2003 5:22 pm

Maybe, maybe not. Some info here:
http://www.roberthancock.com/dell/fpconn.htm

Let us know if they are still using this layout. Hunting for more...
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Toby B. » Sat May 17, 2014 4:19 am

Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master
 
Posts: 14277
Joined: Sun Dec 16, 2001 1:01 am
Location: Maine


Return to Motherboard Identification Forum

Who is online

Users browsing this forum: No registered users and 5 guests