Ok -another OLD MOBO info iD needed!!

The place to post if you are having trouble identifying your motherboard.

Moderator: The Mod Squad

Ok -another OLD MOBO info iD needed!!

Postby sirrushx » Fri Mar 11, 2016 12:56 pm

:o :( Ok -I had to Trash /recycle my buggy( Bios was really BAD at Setup time ---never held info correctly Couldn,t even recognizea Cd cdrive!!! ) ATX 694TAS-socket 370 Machspeed mobo --it survived 18 inches of water in the Basement -- from Hurricane Irene.
Now Iam am putting in -sort of regretfully the Original MOBO a Gateway Essential 500 LP tower unit. :oops:

Has these Jumpers on it I can sort of read j7C1

j7B1

j8G2


j6E1 (F.P. USB jumper)


What I really need to know is the Switch connectors for the front Panel Buttons /LEDS.

When it worked this BIG WHITE CABINET of a PC -- with original MOBO -was like an Old Slow Reliable truck --got the Job done ,,nothing performance /flashy -outstanding -just plain RAN!!!!!!

regards -stu PDT_Armataz_01_06
"If There was any Economic Justice In this United States We live In , We would All Be Driving Hummers & Eldorados & Magnums and Gasolene would be 10 Cents A gallon !!!"
sirrushx
Initiate
Initiate
 
Posts: 74
Joined: Fri Nov 25, 2005 2:46 pm
Location: Woodstock ,NY (ugly Hippie Has Been Town!!!)

Re: Ok -another OLD MOBO info iD needed!!

Postby Karlsweldt » Fri Mar 11, 2016 4:32 pm

http://us.gateway.com/gw/en/US/content/ ... -downloads
Input the model and SNID and you should find a manual.
F@H.. to solve mankind's maladies.. in our lifetimes!
Karlsweldt
Mobo-fu Master
Mobo-fu Master
 
Posts: 20662
Joined: Wed Nov 12, 2003 11:57 am
Location: 07438

Re: Ok -another OLD MOBO info iD needed!!

Postby Toby B. » Sat Mar 12, 2016 12:58 am

So you are putting in the MachSpeed board into a Gateway case?

As near as I can tell Jetway is the original... (trying to confirm)
http://www.elhvb.com/mobokive/Archive/J ... index.html

The search function of the forum absolutely sucks... I need to search by hand, to verify who sold what, but as far as a manual for the board you can find the one you need listed on the linked page.

It looks like the Jetway board was resold under at least two other company names..

Like Karl mentioned above you will need the the case info as well.
Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master
 
Posts: 14277
Joined: Sun Dec 16, 2001 1:01 am
Location: Maine

Re: Ok -another OLD MOBO info iD needed!!

Postby sirrushx » Sat Mar 12, 2016 12:02 pm

Toby B. wrote:So you are putting in the MachSpeed board into a Gateway case?

As near as I can tell Jetway is the original... (trying to confirm)
http://www.elhvb.com/mobokive/Archive/J ... index.html

The search function of the forum absolutely sucks... I need to search by hand, to verify who sold what, but as far as a manual for the board you can find the one you need listed on the linked page.

It looks like the Jetway board was resold under at least two other company names..

Like Karl mentioned above you will need the the case info as well.
:o I already HAD the Machspped running for 7 years -It just needed to be replaced -- going for a Temporary Downgrade :wink: thanks for your enquiry!!!!!-stusirrushx
"If There was any Economic Justice In this United States We live In , We would All Be Driving Hummers & Eldorados & Magnums and Gasolene would be 10 Cents A gallon !!!"
sirrushx
Initiate
Initiate
 
Posts: 74
Joined: Fri Nov 25, 2005 2:46 pm
Location: Woodstock ,NY (ugly Hippie Has Been Town!!!)

Re: Ok -another OLD MOBO info iD needed!!

Postby evasive » Thu Mar 24, 2016 5:23 am

manual:
http://www.elhvb.com/mobokive/archive/j ... 4TAS3A.ZIP

donations for elhvb domain welcome ;)
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands


Return to Motherboard Identification Forum

Who is online

Users browsing this forum: No registered users and 2 guests