P&Q 4606CM-1 94V-0 E162264

The place to post if you are having trouble identifying your motherboard.

Moderator: The Mod Squad

P&Q 4606CM-1 94V-0 E162264

Postby tillberygrandec » Sun Jul 07, 2013 2:33 pm

Any idea what this board is. All it says is P&Q 4606CM-1 94V-0 E162264, Intel and HP. I've searched everywhere and can't find it. I saw a similar post saying it was PC Chips, but there is no model number I can find that can lead me to the right manual / bios.


Here are a couple photos. My issue is that I can't tell which pins are power / LED / HDD, etc...

i.imgur .com/QZS1lWc.jpg (full shot)

i.imgur .com/bvCtMG8.jpg (markings)

i.imgur .com/zOiBZW8.jpg (power button / LED pins)

Any help is much appreciated.
tillberygrandec
Pilgrim
Pilgrim
 
Posts: 3
Joined: Sun Jul 07, 2013 1:30 pm

Postby evasive » Mon Jul 08, 2013 4:45 am

The way the board is positioned in there it will short-circuit in various places and not work whatsoever.

In the markings picture I can see just a bit of the sticker with the compaq/hp spare part number in the bottom. Post a full pic of that please, it's your best chance at an ID.
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby tillberygrandec » Mon Jul 08, 2013 6:55 am

evasive wrote:The way the board is positioned in there it will short-circuit in various places and not work whatsoever.

In the markings picture I can see just a bit of the sticker with the compaq/hp spare part number in the bottom. Post a full pic of that please, it's your best chance at an ID.


BINGO! I googled the SP#, and that was the key. Thanks for your help. The good news is that, despite using the wrong case, nothing seemed to short out!
tillberygrandec
Pilgrim
Pilgrim
 
Posts: 3
Joined: Sun Jul 07, 2013 1:30 pm

Postby evasive » Tue Jul 09, 2013 2:12 am

What did it end up to be? I'm asking this because we are trying to complete the info at ctechinfo.net as much as possible -> a site about HP and Compaq motherboards used for people like you that try to recycle things.
We hate rut, but we fear change.
********************************
System error, strike any user to continue...
evasive
Mobo-fu Master
Mobo-fu Master
 
Posts: 37389
Joined: Sun May 06, 2001 12:01 am
Location: Netherlands

Postby Hardware Junkie » Tue Jul 16, 2013 8:29 am

Just for ease of reference for future use.

http://i.imgur.com/QZS1lWc.jpg
http://i.imgur.com/bvCtMG8.jpg
http://i.imgur.com/zOiBZW8.jpg


Looks like he's mounted it in a standard case. Unfortunately the SP # is blocked on both pictures.
"Imagination is the only weapon in the war against reality." -Jules de Gautier

Image
Hardware Junkie
Mobo-fu Master
Mobo-fu Master
 
Posts: 19405
Joined: Thu Jan 25, 2001 1:01 am
Location: 00000h - 0000Fh

Postby Hardware Junkie » Tue Jul 16, 2013 8:37 am

http://www.impactcomputers.com/404228-000.html
http://www.electric-equipments.com/prod ... 00844.html

DX7x00 series Slim Tower system board
(Models such as 7300, 7700, etc..)

Blocked SP (Spare Part) Number, from original post, is likely 404674-001
"Imagination is the only weapon in the war against reality." -Jules de Gautier

Image
Hardware Junkie
Mobo-fu Master
Mobo-fu Master
 
Posts: 19405
Joined: Thu Jan 25, 2001 1:01 am
Location: 00000h - 0000Fh

Postby Toby B. » Tue Jul 16, 2013 5:20 pm

If I am not mistaken the board is codenamed WILDWEST, if you look near the angled edge of the board you should see the codename..

http://www.ctechinfo.net/motherboards/o ... ldwest.php
Toby B.
Lead Mobo-fu Master
Lead Mobo-fu Master
 
Posts: 14277
Joined: Sun Dec 16, 2001 1:01 am
Location: Maine


Return to Motherboard Identification Forum

Who is online

Users browsing this forum: DotBot [Bot], Exabot [Bot] and 1 guest

cron