Search found 289 matches

by inteljunky
Wed Feb 11, 2004 5:24 pm
Forum: Recommendations
Topic: P4 coolers
Replies: 5
Views: 1043

thanks for the info. I dont want to go buy a cooler and then have it perform poorly. If anyone has some good alternative means other than air i would like to view those as well.
by inteljunky
Wed Feb 11, 2004 5:20 pm
Forum: Tech Support
Topic: New comp build problem
Replies: 24
Views: 2675

Regarding the video, I don't think that the BIOS setting for PCI or AGP makes much difference if you have only one video card. Its only real purpose (as far as I know) is to determine which is the primary display card if you have two graphics cards: an AGP card and a PCI card. on some boards i have...
by inteljunky
Tue Feb 10, 2004 3:00 pm
Forum: Recommendations
Topic: P4 coolers
Replies: 5
Views: 1043

P4 coolers

I have had many intel chips and oddly I have never overclocked any of them except for a P100 to 120 about a month ago. Basicly I want to cool my north bridge and cpu to near ambiant temps at idle and noise is no issue. I just want to know what are the best items out there to cool my P4 down. I would...
by inteljunky
Tue Feb 10, 2004 2:11 pm
Forum: Tech Support
Topic: New comp build problem
Replies: 24
Views: 2675

I read it. what I said was to try putting a PCI card in it and flip it to use the agp port, save config then put your agp card back in. some boards are set to initially look for a pci video card, and will NOT display on agp until the bios is changed no there is no beeps either its so weird it powers...
by inteljunky
Tue Feb 10, 2004 2:08 pm
Forum: Tech Support
Topic: Intel D875 mobo, false cpu temp alarms (I think)
Replies: 3
Views: 901

if the voltage to the proc goes low and the temp goes up.... that doesnt make sense at all. it has to be a false reading.... imo it might beable to trip like that if the power dips down for a breif second, pending on how the temp chip reads the thermodevice. this would also explain the voltage warning
by inteljunky
Tue Feb 10, 2004 1:53 pm
Forum: Tech Support
Topic: New comp build problem
Replies: 24
Views: 2675

could the bios be set to use the PCI vid card instead of AGP? some boards come default like that
by inteljunky
Fri Feb 06, 2004 3:46 am
Forum: Motherboard Identification Forum
Topic: Need help identifying motherboard
Replies: 6
Views: 1130

i got it, here is the link.
thank goodness for internet archiving
link
by inteljunky
Fri Feb 06, 2004 3:31 am
Forum: Motherboard Identification Forum
Topic: jumper settings for AZZA PT-5VP v1.2
Replies: 5
Views: 1038

sweet dude thanks a lot
by inteljunky
Thu Feb 05, 2004 12:52 am
Forum: Motherboard Identification Forum
Topic: jumper settings for AZZA PT-5VP v1.2
Replies: 5
Views: 1038

Manual: http://www.azza.com.tw/FTP/Manuals/5VP1X.PDF I have an AZZA PT-5IT Ver. 1.2 and I cant find the right layout anywhere. There are 2 sites that have that board listed, but not the 1.2 version, as the voltage jumpers are different. I would like to use this board for my server, but I would like...