Doc Overclock · 12-11-2000 · Category: Guides

Step 2

Hold your CPU in your left hand and look very closely at the CPU, so as to clearly see the L1 bridges. Use a business card to separate the bridges so that you do not connect the L1 bridges to each other. Work your way across the bridges from left to right (using a business card as a separation tool) and connect the bridges by rubbing the pencil back and forth over the bridges about twenty times until it is dark black, not the normal gold color. Make sure that all the bridges are reconnected, but not touching each other, and you are on your way. I know it sounds incredible, but that is actually all there is to it. Your processor, if done correctly, is ready to be overclocked. It can now be set to run at different clock frequencies, eliminating the need to increase the FSB.

Contents

1. Introduction
2. Setup
3. Step 1
4. Step 2
5. Step 3
6. Conclusion